Check Accuracy of Double-Run Feed Gate Opening

1. Move latch (A) to the wide open setting. There should be a gap (D) anywhere from touching to 0.8 mm (1/32 in.) between gauging ledge (B) and feed gate (C).

2. Adjust the gap by holding feed gate tightly (with a screwdriver) against the gauging ledge.

3. Rotate the gate latch to the wide open setting.

N36440


A-Latch Lever
B-Gauging Ledge
C-Feed Gate
D-Gap

AG,OUO6074,1012 -19-09MAY00-1/1