Replace Single-Disk Boot

1. Insert cap screw (A) through boot, as shown.

2. Place shim (B) on boot as required. See ADJUSTING TOE SCRAPER FOR SINGLE DISK OPENERS in Operating The Machine section.

3. Install boot (C) to boot support (D).

4. Pull boot back against boot support while tightening nut (E).

5. Adjust scraper. See ADJUSTING TOE SCRAPER FOR SINGLE DISK OPENERS in Operating The Machine section.

N81240E1


A-Cap Screw
B-Shim
C-Boot
D-Boot Support
E-Nut

AG,OUO6074,1018 -19-09MAY00-1/1