CAUTION: Be careful when using diesel fuel because it might explode and injure someone. Use only in well-ventilated areas away from any sparks or flames.

IMPORTANT: Do not allow diesel fuel (or any other petroleum product) to come in contact with the rubber tubes as it will cause deterioration.

2. Turn feed shafts with a wrench or turn drive wheel to check that they turn freely. Work shifter back and forth.

3. Make certain all seed tubes are free of obstructions.

4. Install and adjust any chains removed. If a drive is not going to be used, leave that chain off.

5. Check tires, inflate if necessary.

6. Lubricate machine. See Lubrication section.

7. Review the operating instructions in this manual and make the settings necessary for the seed being used.

8. For row markers, if machine is stored with cylinder rod end extended, clean rod before retracting.

9. Follow safe "attaching" steps outlined in the Attaching and Detaching section, then remove machine from storage.

AG,OUO6074,1029 -19-09MAY00-1/1