Transporting Machine on a Trailer

IMPORTANT: When transporting machines with seed and fertilizer in the boxes, settling and packing of material will occur and drive assembly may be damaged. Turn counter shaft backwards with a wrench after transporting, to insure fertilizer shaft is free.

1. Install lock pin in transport position and pull machine on trailer.

2. Put jackstand on front frame and pin in place.

AG,OUO6074,910 -19-09MAY00-1/2

3. (Drills with folding tongue) Remove rear cap screw (A) on folding tongue (B) and fold. Replace cap screw in tongue.

4. (Drills with folding tongue) Tighten front cap screw (C) on folding tongue tight enough to hold tongue in transport position.

5. Block-and-chain machine securely to trailer.


A-Cap Screw
B-Tongue
C-Pivot Cap Screw

N89241N

AG,OUO6074,910 -19-09MAY00-2/2