Adjusting TRU-VEE™ Opener Gauge Wheel Tires

IMPORTANT: With gauge wheel installed, gauge wheel arm should pivot with just enough resistance so that wheels will not rotate until external force is applied when in raised position. This typically requires pivot bolt (B) torque of 7-9 N·m (60-80 lb-in.).

Add or remove shims (A) to adjust gauge wheel tires. Tires should just touch blades at their closest point to prevent dirt or field-residue buildup.

A-Shims
B-Pivot Bolt

TRU-VEE is a trademark of Deere & Company.

AG,OUO6074,921 -19-09MAY00-1/1