| 4 and 6›Row Configurations-Available Spacings |
| 762 mm (30 in.) |
| 813 mm (32 in.) |
| 914 mm (36 in.) |
| 965 mm (38 in.) |
| 1016 mm (40 in.) |
| Number of Units |
4 or 6 |
| Number of Drums |
2 per unit |
| Number of Bars (Front Drum PRO-16) |
16 |
| Number of Bars (Rear Drum PRO-16/Front and Rear PRO-12) |
12 |
| Number of Spindles |
| Per Bar (PRO-16) |
20 |
| Per Bar (PRO-12) |
18 |
| Per Unit (PRO-16) |
560 |
| Per Unit (PRO-12) |
432 |
| Per Machine (PRO-16) |
2240 (4-Row), 3360 (6-Row) |
| Per Machine (PRO-12) |
1728 (4-Row), 2592 (6-Row) |
| Standard Equipment-Row Units |
| |
Stalklifter extensions and tunnel grates |
| |
Automatic header height control system |
| Row Unit Speeds (PRO-12)a |
| Row Unit Drive Shaft |
1478 rpm |
| Picking Drum |
0-171 rpm |
| Doffer Shaft |
0-1839 rpm |
| Spindle |
0-4251 rpm |
| Row Unit Drive Shaft |
1478 rpm |
| Picking Drum |
0-138 rpm Front, 0-171 rpm Rear |
| Doffer Shaft |
0-1788 rpm Front, 0-1785 rpm Rear |
| Spindle |
0›4287 rpm Front, 0-4251 rpm Rear |
| Speed (Engine at 2200 rpm) |
3750 rpm |
| aRow unit speeds listed are theoretical maximums at 2250 engine rpm. Actual speeds may be approximately five percent less due to hydrostatic and belt slippage. |
|
|
AG,OUO1011,1236 -19-17MAR05-1/4
|
| Capacities |
| Cotton Basket, Full Height |
33.6 m3 (1400 cu. ft) |
| Fuel Tank |
757 L (200 U.S. gal) |
| Water Solution Tank |
1306 L (345 U.S. gal) |
| Lubrication Reservoir |
303 L (80 U.S. gal) |
| Cooling System |
42 L (44 U.S. qt) |
| Engine Crankcase (Includes Filter) |
29 L (31 U.S. qt) |
| Hydraulic/Hydrostatic System |
96.5 L (25.5 U.S. gal) |
| Hydraulic/Hydrostatic Reservoir |
66 L (18 U.S. gal) |
| Transmission/Brake System |
9.5 L (10 U.S. qt) |
| Final Drive |
8.5 L (9 U.S. qt) |
| Row Unit Gear Case |
3.7 L (1 U.S. gal) |
| Ground Speeds-(See Driving Machine in Operating the Machine section). |
| Tires |
| Front Drive Wheels |
20.8 x 42 14PR (R1) Standard, (R2) Optional |
| Dual Wheels (Standard 6-Row) |
20.8 x 42 14PR (R1) or (R2) Cleated |
| Rear Guide Wheels (Standard) |
14.9 x 24 12 PR (R4) Cleated |
| Power Rear Guide Wheels (Optional) |
14.9 x 24 12PR (R2) |
| Power Rear Guide Wheels (Optional) |
480/65R24 |
| Type |
Wet, Multiple disk |
| Parking |
Spring applied, Hydraulically released (Automatically applied when hydro handle is in "park" position) |
| Type |
Closed-Center, Pressure Compensated |
| Stand-By Pressure |
18,617 kPa (186.1 bar) (2700 psi) |
| Oil Filter |
Full Flow Suction |
| Oil Cooler |
Air-Cooled |
| 4-Row (30 In.) |
15,806 kg (34,846 lb) |
| 6-Row (30 In.) |
19,107 kg (42,123 lb) |
| Type |
Ring and pinion |
| Ratio |
9.5:1 (10 to 95) |
|
|
AG,OUO1011,1236 -19-17MAR05-2/4
|
| Electrical System |
| System Type |
12 Volt, Negative Ground |
| Battery (2 used) |
GRP31, 925 CCA |
| Alternator |
120 amp |
| Head Lights |
Type 9012 (AH162232) |
| Field Lights |
Type 9006 (AH127718) |
| Basket Light Bulb |
Type 4411 (AF3892R) |
| Sealed Lights (Basket Lights, Door Light and Reservoir Light) |
AN272464 |
| Front and Rear Amber Warning Lights |
Type 1156 (AD2062R) |
| Red Turn Signal, Tail and Hazard/Marker Lights |
Type 3057 (H133384) |
| Turn Signal Indicator and Gauges |
Type 161 (AA27526 OR R77436) |
| Dome and Console Light Bulb |
Type 211-2 (57M7173) |
| Overhead Console Warning Display Bulbs |
Type 73 (AH108380) |
| Engine |
| Manufacturer |
John Deere |
| Model |
6081HN |
| Type |
Wet sleeve, valve-in-head, air-to-air aftercooled, diesel |
| Aspiration |
Turbocharged |
| No. of Cylinders |
6, in-line |
| Compression Ratio |
15.8:1 |
| Bore |
116 mm (4.56 in.) |
| Stroke |
129 mm (5.06 in.) |
| Displacement |
8.1 L (497 cu in.) |
| Horsepower |
261 kW (350 hp) |
| Valve Clearance-Intake |
0.46 mm (0.018 in.) |
| Valve Clearance-Exhaust |
0.71 mm (0.028 in.) |
| High Idle Setting |
2300 rpm |
| Mid-Throttle Setting |
1700 rpm |
| Idle-Throttle Setting |
920 rpm |
| Lubrication |
Full-Flow Filter w/By-Pass |
| Type |
Direct Injection |
| Injection Pump Type |
In-Line w/Electronic Governor |
| Fuel Filters |
Primary Water Separator and Final |
| Air Cleaner |
Dry-Type with Safety Element and Aspirated Pre-Cleaner |
| Type |
Single-Pressure with Gear Driven Water Pump |
| Temperature Control |
Dual, Heavy-Duty, 82° C (180° F) Thermostats |
| Fuses-(See Fuses And Relays in Chassis section). |
|
|
AG,OUO1011,1236 -19-17MAR05-3/4
|
| Operator's Cab |
| Type |
Cab (No ROPS) with heater and air conditioner, Deere/Delco AM/FM/Stereo with cassette and weather band, windshield wiper, deluxe seat and seat belt, instructional seat and seat belt, electronic dual display tachometer with hourmeter, console with speed and function control handle, electronically activated units/fan and operator presence system. |
| Primary |
AH115836 |
| Secondary |
AH115833 |
| Windshield Wiper |
| Blade Length |
508 mm (20 in.) |
| Arm Length |
508 mm (20 in.) |
| Outside (3) |
200 x 297 mm (7.88 x 11.68 in.) |
| Capacity |
5274 W/hr (18,000 BTU) |
| Make (Compressor) |
Nippondenso |
| Capacity |
64.46 kW/h (22,000 BTU) |
| Refrigerant |
R-134A |
| Refrigerant Charge |
Approx. 2 kg (4-1/2 lb) |
| Pressure Plate Scrapping Plates |
| Mud Scrapers |
| Stalklifter Rods |
| Lubricator Transfer Pump |
| Header Height Control Inner Units Sensing Shoes |
|
|
AG,OUO1011,1236 -19-17MAR05-4/4
|
|