Following Safe Transport Procedures

causym CAUTION: When transporting machine on a road or highway at night or during day, use warning lights and devices for adequate warning to operators of other vehicles. Check local governmental regulations. Various safety devices are available from your John Deere dealer. Keep safety items in good condition. Replace missing or damaged items.

Upward force on hitch may cause instability when transporting. Add ballast to tractor as required.

1. BEWARE of overhead wires and narrow gates. KNOW transport and width of your machine. (See Specifications section.)

2. Travel at a reasonable and safe speed; REDUCE speed over rough or uneven terrain, slopes, and when turning.

3. BE SURE SMV emblem, reflectors, and warning lights are clean, visible, and in good condition.

4. BE SURE your safety chain has a strength rating greater than gross weight of machine. (See your John Deere dealer.)

N36564


A-Lights
B-SMV Emblem
C-Reflector Tape
D-Reflectors

NXH8,609OM30,XB -19-17JUL98-1/1