Install Convex Scraper

NOTE: Convex scrapers are not used at standard locations.

Attach scraper (A) to scraper tube (B) with 3/8 in. U-bolt and lock nuts (C), maintaining a 3 mm (1/8 in.) gap between scraper and blade.

NOTE: Machines with C-spring standards require a 6.4 mm (1/4 in.) gap between scraper and blade.

A-Scraper
B-Scraper Tube
C-U-bolt And Lock Nuts

NXH8,63730,1AP -19-30NOV98-1/1