Leveling Wing Frames to Main Frame

1. Stand behind machine. Adjust eyebolt on each wing frame depth control cylinder until gang tubes (C) are level side-to-side across width of machine.

2. To adjust wing frame, loosen jam nut (A) on eyebolt and turn nut (B). Tighten jam nut.

NOTE: One turn of nut (B) is equal to 8 mm (3/10 in.) of height change of wheel.

An adjustment wrench is provided for this adjustment. It is located on right-hand front of main frame.


A-Jam Nut
B-Turn Nut
C-Gang Tubes

N42188UT
N42169J

NXH8,M63735,AD1 -19-23JUN98-1/1