General Guidelines for Use
1.
Use recommended size tractor. (See Specifications section.)
2.
Raise machine out of ground before making turns. Avoid making sharp turns that may cause tractor tire to make contact with implement.
3.
Never raise or lower wings while machine is in motion.
4.
Never operate in field with wings raised.
5.
Be sure machine is on level ground before raising or lowering wings.
6.
Be sure tractor and machine have been properly prepared. (See Preparing Tractor and Preparing Machine sections.)
7.
Rigid Machines
-Remove transport lock-up on lift cylinder, in order to lower machine in ground.
8.
Folding Machines
-Open hydraulic cylinder transport lock-up valve when in field in order to lower machine into ground.
9.
If machine is equipped with Hydraulic Wing Control Option, thoroughly review Hydraulic Wing Control Operation in this section.
10.
View Operation Video shipped with machine.
|