Troubleshooting
Before turning to "Problem" and "Possible Remedy" of this section, check following:
|
|
| Check |
Initial Setting |
Adjustment |
| VIEW OPERATION VIDEO SHIPPED WITH MACHINE. |
|
|
| OPERATING SPEED |
Between 6.4-9.7 km/h (4-6 mph). Reduce speed in rocky conditions. |
-- |
| DRAWBAR |
Place in fixed, centered and down position, 406-508 mm (16-20 in.) from ground to top of drawbar.
For Trac-Tractors and four-wheel drive tractors, leave one hole clearance on each side of drawbar for FIELD OPERATION ONLY. |
-- |
| ALL ITEMS SHOWN ON PREPARING MACHINE CHECKLIST |
|
|
| BEFORE ENTERING FIELD GUIDELINES |
|
|
| FOLLOW ALL FIELD OPERATING GUIDELINES |
|
|
|
|
NX,637TS1,MGS1 -19-27APR99-1/1
|
|