Removing and Cleaning Fresh Air Filter, Tray and Pre-Cleaner

Recommended Service Interval
Clean Fresh Air Filter and Pre-Cleaner (Normal Conditions) Every 50 Hours
Clean Fresh Air Filter and Pre-Cleaner (Dusty Conditions) Daily

 

1. Pull quick-release lever (A) on duct (B) next to left-hand side of cab.

2. Lift duct to clear platform floor, swing duct rearward and rest it on platform.

3. Loosen knob (C), remove cover (D) and dump attached dirt tray.


A-Quick-Release Lever
B-No.2 Duct
C-Knob
D-Cover

N60267
N58511

OUO6043,0001397 -19-22MAR06-1/2

4. Remove wing nut (A) and pull out fresh air filter (B).

5. Push down on pre-cleaner (C) and pull it out from the top.

6. Check hole (D) in floor under pre-cleaner for debris. Clean as necessary.

7. Wash and dry pre-cleaner and reinstall.

8. Clean or replace fresh air filter as necessary.

IMPORTANT: Do not overtighten knob.

9. Install cover and tighten knob.


A-Wing Nut
B-Fresh Air Filter
C-Pre-Cleaner
D-Hole

N58512
N57097

OUO6043,0001397 -19-22MAR06-2/2