Setting Spray Off Pressure

NOTE: Spray rate controller will attain the spray off pressure when master spray is off. Spray off pressure is the pressure the pump will maintain when not spraying. Spray off pressure is primarily intended to increase agitation when not spraying. It should not be used as a means for boom charge compensation.

1. Press "SETUP" to display SETUP menu.

2. Press letter button next to "SprayStar".

3. Press letter button next to "Spray Off Press. (psi)".

4. Enter the desired spray off pressure.

5. Press letter button next to "Spray Off Press. (psi)" to save this value.

For example, to enter 40 psi press 4, 0 and then "F". 40 psi is now the agitation pressure that will be maintained.

6. Press "RUN" to return to Page 1 of the RUN menu.

N65866

OUO6092,00005F0 -19-08OCT04-1/1