Turning Flow Rate Alarm On/Off

The flow rate alarm tells the operator when the sprayer applies more or less than 20% of the target application for 6 continuous seconds. "LOW SOLUTION FLOW" or "HIGH SOLUTION FLOW" also appears on the RUN pages.

To turn the alarm "ON" or "OFF":

1. Press "SETUP".

2. Press letter button next to "SprayStar".

3. Press "PAGE".

4. Press letter button next to "Alarm Setup".

5. Press letter button next to "Flow rate alarm is:" to toggle between alarm "ON" or "OFF".

N66487

OUO6092,0000616 -19-18JUN04-1/1