Unfolding Boom- 18.3 m (60 ft)

1. Start engine. Press top of raise/lower switch (A) to raise boom out of boom rests.


A-Raise/Lower Switch

N67771

OUO6092,00006CC -19-22SEP04-1/4

2. Press and hold fold mode switch (A) while pushing on bottoms of fold/level switches (B), until booms are fully unfolded.

3. Release fold mode switch.

4. Press bottom of boom fold/level switches to extend level cylinders and level boom to horizontal position.


A-Fold Mode Switch
B-Fold/level Switches

N52725
N67772

OUO6092,00006CC -19-22SEP04-2/4

5. Press bottom of raise/lower switch (A) to lower booms and position nozzles at desired spray height.


A-Raise/Lower Switch

N67773

OUO6092,00006CC -19-22SEP04-3/4

NOTE: Booms cannot be adjusted below horizontal.

6. Use right-hand boom fold level switch (B) and left-hand boom fold level switch (A) to tilt booms for desired spray angle.


A-Left-Hand Boom Switch
B-Right-Hand Boom Switch

N67774

OUO6092,00006CC -19-22SEP04-4/4