Charging Batteries (On Machine)

2. With charger in the off position, attach positive charger cable (red) to the positive (+) remote terminal (A).

3. Attach negative charger cable (black) to the negative (-) remote terminal (B).

IMPORTANT: Set battery charger at the nominal 12 volt and no more than 16 volt maximum.

4. Turn charger to ON position and charge batteries following manufacturer's instructions for using the charger.

5. Turn charger to OFF position. Remove negative charger lead first, then the positive lead.

A-Positive Remote Terminal
B-Negative Remote Terminal

OUO6092,000081F -19-15JUL05-1/1