OMN300549: 4720 Self-Propelled Sprayer(N04720X007001- ), Block File: OUO6092_0000BAF_19

1. Press "SETUP" to display SETUP menu.

2. Press letter button next to "SprayStar".

3. Press "PAGE".

4. Press letter button next to "Controller Adjust".

5. Press letter button next to "Reset to Default".

NOTE: The settings for the solution pump calibration or the solution system can be changed to the factory default.

6. To reset pump calibration numbers to factory settings, press letter button next to "Pump Calibration".

7. Press letter button next to "Pump Calibration" again to confirm selection.

8. To reset solution system to factory settings, press letter button next to "Memory Default".

9. Press letter button next to "Memory Default" or letter button next to "Pump Calibration" again to confirm selection and complete reset to default.

OUO6092,0000BAF -19-15AUG06-1/1