Fertilizer Drive Settings

A graduated increase in speed (from slow to fast) is made with the gear case speed selector (A). Turn lock (C) vertical, then pull out knob (B) to disengage gears. Move the speed selectors to the "Gear Case Setting" as shown on the charts for your desired kilograms per hectare (pounds per acre).

NOTE: Set the speed selector (A) so that the desired digit is just outside the GEARCASE, not rubber seal. Line up mark with edge of cover. If unsure of setting, remove cover to check gear position.

Push knob in and turn lock horizontal.

NOTE: Disengage gears when not distributing fertilizer.

A-Gear Case Speed Selector
B-Knob
C-Lock

AG,OUO1018,43 -19-31MAR99-1/1