Machine Specifications

6›Row Configurations-Available Spacings
762 mm (30 in.)
813 mm (32 in.)
914 mm (36 in.)
965 mm (38 in.)
1016 mm (40 in.)
Row Units
Number of Units 6
Number of Drums 2 per unit
Number of Bars (Front Drum PRO-16) 16
Number of Bars (Rear Drum PRO-16/Front and Rear PRO-12 VRS) 12
Number of Spindles
Per Bar (PRO-16) 20
Per Bar (PRO-12 VRS) 18
Per Unit (PRO-16) 560
Per Unit (PRO-12 VRS) 432
Per Machine (PRO-16) 3360 (6-Row)
Per Machine (PRO-12 VRS) 2592 (6-Row)
Standard Equipment-Row Units
  Stalklifter extensions and tunnel grates
  Automatic header height control system
Row Unit Speeds (PRO-12 VRS)a
Row Unit Drive Shaft 1478 rpm
Picking Drum 0-171 rpm
Doffer Shaft 0-928 rpm
Spindle 0-526 rpm
Row Unit Speeds (PRO-16)
Row Unit Drive Shaft 1478 rpm
Picking Drum 0-49 rpm Front, 0-171 rpm Rear
Doffer Shaft 0-874 rpm Front, 0-928 rpm Rear
Spindle 0›450 rpm Front, 0-525 rpm Rear
Air System Fans
Speed (Engine at 2300 rpm) 4330 rpm (Nominal)
aRow unit speeds listed are theoretical maximums at 2250 engine rpm. Actual speeds may be approximately five percent less due to hydrostatic and belts slippage.

 

OUO1078,000003D -19-27MAR09-1/4

Capacities
Module Weight 2041-2268 kg (4500-5000 lb)
Fuel Tank 1098 L (290 U.S. gal)
Water Solution Tank 1325 L (350 U.S. gal)
Lubrication Reservoir 288 L (76 U.S. gal)
Cooling System 64.4 L (17 U.S. gal)
Engine Crankcase (Includes Filter) 41 L (11 U.S. gal)
Hydraulic/Hydrostatic Reservoir 246 L (65 U.S. gal)
Hydraulic/Hydrostatic System 348.3 L (92 U.S. gal)
ProDrive Transmission/Brake System 19 L (5 U.S. gal)
Final Drive 7.8 L (2 U.S. gal)
Pump Drive Gearbox 15.1 L (4 U. S. gal)
Row Unit Gear Case (Each One) 0.66 L (0.175 U.S. gal)
Powered Rear Axle Main Body Housing 7.8 L (2 U. S. gal)
Powered Rear Axle Auxiliary Gearbox 1.3 L (45 oz)
Powered Rear Axle Planetary 3.8 L (1 U. S. gal)

 

Ground Speeds-(See DRIVING MACHINE in Operating the Machine section).
Tires
Front Dual Wheels 520/85R42 (R1)
Power Rear Guide Wheels 520/85R34 (R1)
Brakes
Type Wet, Multiple disk
Parking Spring applied, Hydraulically released (Automatically applied when hydro handle is in "park" position)
Hydraulic System
Ground Drive (Charge Circuit Filtration) Closed Loop Variable Displacement
Differential Pressure-42,700 kPa (427 bar) (6192 psi)
Unit Drive System (Charge Circuit Filtration) Closed Loop Variable Displacement
Differential Pressure-30,200 kPa (427 bar) (4379 psi)
Round Module Builder Drive System (Charge Circuit Filtration) Closed Loop Variable Displacement
Differential Pressure-25,500 kPa (255 bar) (3698 psi)
Steering System Open Loop Fixed Displacement
Pressure-20,700 kPa (207 bar) (3002 psi)
Auxiliary System (Full Return Filtration) Open Loop Variable Displacement -PL Control
PL Setting Pressure-21,000 kPa (210 bar) (3045 psi)
Stand-By Pressure 20,995 kPa (209.9 bar) (3045 psi)
Oil Cooler Oil-to-Air Cooler For Case Drains
Oil Filter Suction Strainers, Return Filters
Machine Weight
6-Row (30 In.) 30,698 kg (67,677 lb)

 

OUO1078,000003D -19-27MAR09-2/4

Final Drive
Type Ring and pinion
Ratio 9.5:1 (10 to 95)
Electrical System
System Type 12 Volt, Negative Ground
Battery (3 used) GRP31, 925 CCA
Alternator 200 amp
Head Lights Type 9005 (RE179326)
Field Lights (Optional) Type HID (RE179974)
Basket Light Bulb Type 4411 (AF3892R)
Sealed Lights (Basket Lights, Door Light and Reservoir Light) AN272464
Front and Rear Amber Warning Lights Type 1156 (AD2062R)
Red Turn Signal, Tail and Hazard/Marker Lights Type 3057 (H133384)
Turn Signal Indicator and Gauges Type 161 (AA27526 OR R77436)
Dome and Console Light Bulb Type 211-2 (57M7173)
Overhead Console Warning Display Bulbs Type 73 (AH108380)

 

Engine
Manufacturer John Deere PowerTech Plus Engine
Model 6135HN001
Type Wet sleeve, valve-in-head, air-to-air aftercooled, diesel
Aspiration Turbocharged
No. of Cylinders 6, in-line
Compression Ratio 16.0:1
Bore 132 mm (5.20 in.)
Stroke 165 mm (6.50 in.)
Displacement 13.5 L (824 cu in.)
Horsepower (2100 rpm) 373 kW (500 hp)
Valve Clearance-Intake 0.58 ± 0.05 mm (0.023 ± 0.002 in.)
Valve Clearance-Exhaust 1.10 ± 0.05 mm (0.043 ± 0.002 in.)
High Idle Setting 2300 rpm
Mid-Throttle Setting 1750 rpm
Idle-Throttle Setting 900 rpm
Lubrication Full-Flow Filter w/By-Pass
Fuel System
Type Direct Injection
Injection Pump Type In-Line w/Electronic Governor
Fuel Filters  
Primary RE532952
Secondary RE533910

 

OUO1078,000003D -19-27MAR09-3/4

Engine Air System
Air Cleaner Dry-Type with Safety Element and Aspirated Pre-Cleaner
Primary AH212294
Secondary AH212295
Cooling System
Type Single-Pressure with Gear Driven Water Pump
Temperature Control Triple, Heavy-Duty, 82° C (180° F) Thermostats
Fuses-(See FUSES AND RELAYS in ELECTRICAL SYSTEM SERVICE section).
 
Operator's Cab
Type Cab (No ROPS) with heater and air conditioner, Deere/Delco AM/FM/Stereo with weather band, windshield wiper, deluxe seat and seat belt, instructional seat and seat belt, electronic dual display tachometer, console with speed and function control handle, electronically activated units/fan and operator presence system.
Cab Filters
Primary AH115836
Secondary AH115833

 

Windshield Wiper
Blade Length 1150 mm (45 in.)
Arm Length 1150 mm (45 in.)
Mirror, Rear View
Outside (3) 200 x 297 mm (7.88 x 11.68 in.)
Heater
Capacity 5274 W/hr (18,000 BTU)
Air Conditioner
Make (Compressor) Nippondenso
Capacity 64.46 kW/h (22,000 BTU)
Refrigerant R-134A
Refrigerant Charge Approx. 2.3 kg (5 lb)
Optional Equipment
Video Camera Observation System
Mud Scrapers for Drive Tires
Lubrication Transfer Pump
Light Bar

 

OUO1078,000003D -19-27MAR09-4/4