|
The ROW-TRAK guidance system allows the operator hands-off steering of the machine by simply aligning the row units with rows and then pressing an activation button on the hydro lever.
At the end of the row, turning the steering wheel will deactivate system and return manual control of the machine back to the operator. After system has been deactivated, the operator must repeat row alignment and button activation procedures to activate ROW-TRAK system.
(See OPERATING ROW-TRAK in this section for detailed description of operation).
|
All set up programming and diagnostics are performed at the factory and John Deere dealer prior to machine delivery.
Operation and set up procedures in this section include:
-
Operating ROW-TRAK
-
Entering Calibration Mode
-
Calibrating ROW-TRAK
-
Diagnostics
-
Circuit Diagnostic Codes
|