Checking Doffer Column Height

IMPORTANT: Operating with doffer column adjusted too low will result in excessive doffer pad, spindle bushing, and barb wear. If doffer column is adjusted too high, spindles WILL NOT doff properly. DO NOT operate without doffer column properly adjusted.

(See ADJUSTING DOFFER HEIGHT-NORMAL CONDITIONS and ADJUSTING DOFFER HEIGHT-EXTREME CONDITIONS in this section.)

To verify proper doffer column height adjustment do the following:

1. Check spindles for wrap at each module wrap change.

2. Verify a slight drag between spindles and doffers is felt.

NOTE: Make sure air and moistener systems are operating properly and correct moistener solution is being used before adjusting doffer column height.

N42132KM

OUO1078,000025C -19-24MAR09-1/1