Adjusting Lower Plant Guides and Optional Stalklifter Rods

NOTE: Plant guides lift and direct cotton closer to the lower spindles. The plant guides are installed at the factory in maximum lift position. Adjust plant guides to deliver cotton most efficiently to the lower spindles depending on your field conditions.

1. Loosen plant guide adjusting cap screws (B) and lower or raise plant guides (A).

2. Tighten cap screws.

3. Stalklifter rods (optional attachment) can be installed using cap screws and nuts (D and E), clamps (C) and plates (F) as shown.


A-Plant Guides
B-Cap Screws
C-Clamps
D-Cap Screws and Nuts, M10 x25
E-Cap Screws and Nuts, M8 x 25
F-Plates

N79874
N71924

RG53986,0002953 -19-01FEB08-1/1