Removing and Cleaning Fresh Air Filter, Tray and Pre-Cleaner

Recommended Service Interval
Clean Fresh Air Filter and Pre-Cleaner (Normal Conditions) Every 50 Hours
Clean Fresh Air Filter and Pre-Cleaner (Dusty Conditions) Daily

 

1. Pull quick-release lever (A) on duct (B) next to left-hand side of cab.

2. Lift duct to clear platform floor, swing duct and rest it on platform.

3. Loosen knob (C), remove cover (D) and dump attached dirt tray.


A-Quick-Release Lever
B-No.2 Duct
C-Knob
D-Cover

N75672

Left-Hand Duct Removed For Photo Clarity

N75670

RS69585,0000060 -19-22APR08-1/2

4. Remove wing nut (A) and pull out fresh air filter (B).

IMPORTANT: Do not remove pre-cleaner (C).

5. Remove debris from pre-cleaner (C) using vacuum.

6. Clean or replace fresh air filter as necessary.

IMPORTANT: Do not overtighten knob.

7. Install cover and tighten knob.


A-Wing Nut
B-Fresh Air Filter
C-Pre-Cleaner

N58512
N80492

RS69585,0000060 -19-22APR08-2/2