General Guidelines For Use

1. Use recommended size tractor. (See Specifications section.)

2. Verify stabilizer wheels are set in operating position. (Refer to ADJUSTING STABILIZER WHEELS in this section.)

3. Raise machine out of ground before making turns. Avoid making sharp turns that may cause tractor tire to make contact with implement.

4. Never raise or lower wings while machine is in motion.

5. Never operate in field with wings raised.

6. Be sure machine is on level ground before raising or lowering wings.

7. Be sure tractor and machine have been properly prepared. (See Preparing Tractor and Preparing Machine sections.)

OUO6061,000288F -19-02JAN08-1/2

8. OPEN hydraulic cylinder transport lock-up valve when in field.

9. Machine may need adjusting when moving from field to field, when using a tractor with a different drawbar height, or when gauged depth setting is changed.


A-Transport Lock-Up Valve in Open Position

N78547

OUO6061,000288F -19-02JAN08-2/2