Removing From Storage
1.
Check tire inflation. (See CHECKING TIRE PRESSURE in Service section.)
2.
Clean machine thoroughly.
3.
Perform required lubrication. (See Lubrication section.)
4.
Check all hardware and torque as needed.
5.
Check all anhydrous ammonia applicator hoses for bends, cracks and holes. Repair as needed.
6.
Check all hydraulic hoses for bends, cracks and holes. Repair as needed. (See HYDRAULIC HOSE REPLACEMENT in Service section.)
7.
Review Operator's Manual, giving special attention to safety precautions.
|