|
After machine has been completely assembled, inspect to be sure it is in good running order before delivering to customer. The following checklist is a reminder of points to inspect. Check off each item as it is found satisfactory or after proper adjustment is made.
[ ] SMV emblem installed; protective shipping tape removed from reflectors and lights are installed.
[ ] All grease fittings have been lubricated. (See LUBRICATION AND MAINTENANCE section in Operator's Manual.)
[ ] Inspect to be sure all nuts have been tightened to proper torque and all cotter pins spread.
[ ] Tires are properly inflated. Tighten wheel bolts to specified torque.
[ ] Make sure High Speed Fertilizer Openers are properly adjusted.
|
[ ] Warning lights are properly installed and operational.
[ ] Make sure all customer-ordered attachments have been installed or are available for delivery.
[ ] Any parts scratched in shipment have been touched up with paint.
[ ] Remove all shipping decals.
[ ] This machine has been thoroughly checked and to the best of my knowledge is ready for delivery to the customer.
Signed:_________________________
Date:_________________________
|