Setting Flow Rate and Detent Time-6000, 6010, 7000 and 7010 Series Tractors

1. Adjust rate of operation by turning metering valve knob (A). Turn knob counterclockwise to increases flow rate and clockwise to decreases flow rate.

NOTE: Drill operations require use of continuous position (D) on SCV I and no detent position (C) on SCV II, if equipped with row markers. Lock position (B) is not used for drill operations.

2. Turn SCV I to motor position (D) (continuous detent).

3. If drill has row markers, turn SCV II to no detent position (C).


A-Valve Knob
B-Lock Position
C-No Detent Position
D-Continuous Detent Position

RW21395
RW21754
RW21758

AG,OUO1074,435 -19-22FEB00-1/1