Engaging Drive-3 m (10 ft) and 4.6 m (15 ft)

Before operating 3 m (10 ft) and 4.6 m (15 ft) drills, be sure drive wheel is engaged. To move from disengaged to engaged position, turn outside cam (A) until springs (B) are released and pins (C) slide toward inside of cam. Drive system is engaged when inner ends of pins make contact with sprocket "ears" (D).

A-Cam
B-Springs
C-Pins
D-Sprocket "ears"

AG,OUO1074,511 -19-22FEB00-1/1