Attach Half-Speed Drive

1. Open side panel cover (A).

2. Remove 28-tooth gear (B) and 20-tooth gear (C). Retain gear mounting hardware.


A-Cover
B-Gear, 28-Tooth
C-Gear, 20-Tooth

N47800

AG,OUO1074,521 -19-22FEB00-1/2

3. Install 13-tooth gear (A) using previously removed cap screws (B).

4. Install 35-tooth gear (C) with previously removed nut (D). Tighten nut to specification and close box cover.

Specification

Nut -Torque 135 N·m (100 lb-ft)

5. 6. 1 m (20 ft) Drills Only: Repeat procedure on opposite side box. 6. Apply half-speed drive label(s) to inside of lid(s) next to seeding chart.

N47801


A-Gear, 13-Tooth
B-Cap Screws
C-Gear, 35-Tooth
D-Nut

AG,OUO1074,521 -19-22FEB00-2/2