Replacing Drive System Shear Bolt

IMPORTANT: Do not use any other hardware to replace factory specified shear bolt (19H1947) or transmission could be damaged. See your John Deere dealer for correct repair parts.

Replace drive shear bolt (B) with #8 machine screw. Spare shear bolts and lock nuts are provided with the machine and are stored in clamps (A) above the shaft.

Shear bolt is used to protect drive transmission from damage when overloaded. To prevent shearing bolt, avoid transmission overload.

A-Clamps
B-Shear Bolt

AG,OUO1074,557 -19-22FEB00-1/1