CAUTION: Handle and apply fertilizers and chemically treated seeds according to manufacturer's recommendations to keep from being severely injured.

IMPORTANT: To avoid metal corrosion and feed shaft binding or "freezing", clean out all treated seed in box before storing drill (even over night).

2. Operate at a ground speed of 6 km/h to 10 km/h (4 mph to 6 mph).

3. Raise openers out of ground before backing up or making sharp turns in field.

4. Start moving forward before lowering openers.

5. Adjust openers individually to equalize seeding depth.

6. Turn feed shaft BY HAND before adding seed if drill has been standing for a long period of time. If treated seed is used, turn shaft whenever drill has been standing for an hour or longer.

7. Check tire pressure before seeding.

8. Check seed rates.

9. Perform necessary adjustments to achieve proper seed placement. See Preparing The Machine section.

OUO6074,0000169 -19-05DEC00-1/1