Replacing Marker Breakaway Bolt

causym CAUTION: Do not operate without safety bolt (D) installed.

IMPORTANT: Safety bolt MUST be on front side of marker arm (side facing tractor).

The marker breakaway bolt (A) provides breakaway protection when the marker hits an obstacle.

To replace the breakaway bolt, proceed as follows:

Return arm (B) to operating position and insert 5/16 x 5-1/4 in. Grade 5 shear bolt (A) through marker mounting plates and secure in place with washers and nut. Tighten to specification.

A48644


A-Breakaway Bolt
B-Arm
C-Shear Bolts
D-Safety Bolt

Item Measurement Specification

Nut

Torque 34 N·m
(25 lb-ft)

Extra shear bolts (C) are stored in mounting plates.

OUO6074,00004EA -19-05APR07-1/1