Leveling Drill-Simple HitchIMPORTANT: Tighten cap screws according to specifications in torque chart. Level operation requires that the simple hitch link be positioned flat and level to the tractor drawbar. A variety of hitch link positions are available. Hitch position holes are in increments of 57 mm (2.25 in.). If repositioning the hitch link to a different set of holes raises or lowers the front of the frame too far beyond level, hitch link can be turned over and returned to its original set of holes for a half-adjustment. Due to its offset shape, turning the link over changes hitch height by 28.5 mm (1.125 in.). |
|
OUO6074,0000752 -19-17JUN03-1/1 |