A-Clutch
B-Strap, Lower End

C-Cap Screw

D-Strap Holes

E-Clutch Holes

IMPORTANT: Always use lower set of holes (D) when adjusting clutch strap. Do not adjust using upper set of holes (E) in clutch.

Seed clutch (A) is shipped with lower end of strap (B) attached to rockshaft bracket with cap screw (C) in middle hole.

Seed clutch will engage sooner when attached through upper hole.

Seed clutch will engage later when attached through lower hole.

OUO6074,0000DDD -19-03OCT06-1/1