Determine Tractor Drawbar and Implement Clevis Compatibility
|
|
|
IMPORTANT: Avoid machine damage. Match tractor drawbar and implement clevis. Refer to tractor operator's manual for specific drawbar information. Do not exceed static vertical load capacity of tractor drawbar. See Specifications section for vertical |
load and see tractor manual for drawbar limits and heavy duty supports. Match tractor drawbar and implement clevis. The only exception is a category IV clevis used with a category III drawbar that has a 90 mm (3.54 in.) opening. Never exceed vertical load limits. |
| Drawbar and Clevis Compatibility | |||||
| Tractor Drawbar | Implement Clevis | ||||
| Drawbar and Clevis Category | Drawbar Pin (A) Diameter | Drawbar Opening (B) | Slot (C) Length | Slot (C) Width (Minimum) | Clevis Thickness |
| III | 38 mm (1.50 in.) | 70 - 90 mm (2.75 - 3.54 in.) | 41 - 66 mm (1.61 - 2.60 in.) | 41 mm (1.61 in.) | 48 mm (1.89 in.) |
| IV | 51 mm (2.00 in.) | 90 mm (3.54 in.) | 55 - 70 mm (2.17 - 2.75 in.) | 55 mm (2.17 in.) | 50 mm (1.97 in.) |
| V | 70 mm (2.75 in.) | 100 mm (3.94 in.) | 73 - 85 mm (2.87 - 3.35 in.) | 73 mm (2.87 in.) | 60 mm (2.36 in.) |
OUO6074,000102C -19-09AUG07-1/1 |