Replace Fan Belt

NOTE: Fan drive belt is equipped with an automatic tensioner which does not require adjustment.

1. 
   N84400-UN-24APR09

   A - Cap

   Raise hood.

---




2. Remove cap (A) from tensioner pulley.

3. Release tension on fan belt using a 13 mm (1/2 in.) breaker bar and appropriate socket. Remove fan drive belt from tensioner pulley.

4. 
   N84882-UN-26JUN09

   A - Alternator Belt

   Loosen screws (A) and remove cap screw (B).

---




5. Remove alternator belt from alternator pulley.

6. Remove fan belt from remaining pulleys and work over fan to remove.

7. Work replacement fan belt over fan and onto pulleys. (See Fan Belt Routing in this section for diagram.)

8. Install alternator belt on alternator pulley.

9. 
   N84882-UN-26JUN09

   A - Alternator Belt

   Install cap screw (A) and tighten screws (B).

---




10. Install fan belt on tensioner pulley using a 13 mm (1/2 in.) breaker bar and appropriate socket.

11. Install cap on tensioner pulley.

12. Lower hood.