Setting Spray On Pressure

NOTE: Spray rate controller will attain the spray on pressure when master spray is ON and in auto mode and the vehicle slows down too much.

Set spray on pressure setting above nozzle body check valve pressure specification.

Do not set spray on pressure setting too high or over application will occur.

Agitation occurs at system pressure when machine is spraying.

1. Press "SETUP" to display SETUP menu.

2. Press "A" to setup sprayer.

3. Press "E" to change minimum spray pressure setting.

4. Enter the desired minimum spray pressure.

For example, to enter 15 psi press 1, 5 and then "E". 15 psi is now the minimum pressure that will be maintained during spraying.

5. Press "RUN" to return to Page 1 of RUN menu.

AG,OUO1011,688 -19-06JUL99-1/1