Setting Spray Off Pressure

NOTE: Spray rate controller will attain the spray off pressure when master spray is off. Spray off pressure is the pressure the pump will maintain when not spraying. Spray off pressure is primarily intended to increase agitation when not spraying.

1. Press "SETUP" to display SETUP menu.

2. Press "A" to setup sprayer.

3. Press "F" to change spray off pressure.

4. Enter the desired spray off pressure.

For example, to enter 30 psi press 3, 0 and then "E". 30 psi is now the agitation that will we maintained.

5. Press "RUN" to return to Page 1 of the RUN menu.

AG,OUO1011,690 -19-06JUL99-1/1