|
NOTE:
Make sure machine is properly prepared for field operation. Check the following items before operating:
-
All maintenance has been performed.
-
Correct nozzle tips are installed and set for desired spray pattern and row spacing.
-
Wheel tread width is adjusted for row spacing.
-
SPRAYSTAR
™
display has been correctly programmed with the following:
-
Application Rates
-
Tank Volume
-
Minimum Spray Pressure
|
-
Spray Off Pressure
-
Number of Boom Sections
-
Nozzle Spacing
-
Spray Width
-
Check Flowmeter Calibration Number
-
Calibrate Pressure Sensor
-
Calibrate Wheel Speed Sensor
-
Calibrate Radar Sensor (if equipped)
Solution tank is filled, solution valves are correctly positioned and agitation valve (if necessary) is open.
Operator is familiar with all machine controls, their functions, and safe operations.
Clean water tank is filled with clean water.
|