Priming Solution Pump (Nurse Tank Fluid Level Above Sprayer Pump)

1. Operate engine at 1800 rpm.

2. Turn off solution pump switch (A).

A-Solution Pump Switch

AG,OUO1011,860 -19-22JUL99-1/6

CAUTION: QUIK-FILL ™ valve can contain hazardous materials which can poison causing serious injury or death to you or others. Before removing Quik-Fill cap, make sure Quik-Fill valve is turned off.

3. Pivot QUIK-FILL ™ down.

4. Open lock levers and remove cap (A).

5. Connect nurse tank fill hose to QUIK-FILL ™ adapter and close lock levers.

A-Cap

QUIK-FILL is a trademark of Deere & Company.

AG,OUO1011,860 -19-22JUL99-2/6

6. Turn valve (A) to "SOLUTION TANK" position.

7. Close valves (B) and (C).

8. Turn valve (D) to "BYPASS" position.

9. Open nurse tank valve and QUIK-FILL ™ valve (E) for approximately 1 to 2 minutes for proper priming of pump.

NOTE: It may be necessary to wait an additional 1 to 2 minutes for pump to prime if level in nurse tank is just slightly above level in sprayer pump.

A-Tank Selector Valve
B-Solution Tank Open/Close Valve
C-Tank Rinse Nozzles/Eductor Valve
D-Bypass Valve
E-Quil-Fill™ Valve

QUIK-FILL is a trademark of Deere & Company.

AG,OUO1011,860 -19-22JUL99-3/6

NOTE: When using remote solution pump switch, pump is designed to come up to operating speed slowly.

10. Move remote pump switch (A) to "LOAD" position.

A-Remote Pump Switch

AG,OUO1011,860 -19-22JUL99-4/6

11. After solution tank has filled, turn valve (A) to "SOLUTION TANK OPEN" position while closing QUIK-FILL ™ valve (B).

12. Move remote pump switch (C) to "SPRAY" position.

13. Turn valve (D) to "OFF" position.

A-Solution Tank Open/Closed Valve
B-Quik-Fill™ Valve
C-Remote Pump Switch
D-Bypass Valve

QUIK-FILL is a trademark of Deere & Company.

AG,OUO1011,860 -19-22JUL99-5/6

14. Remove fill hose from QUIK-FILL ™ adapter and replace cap (A).

15. Pivot QUIK-FILL ™ underneath frame.

A-Cap

QUIK-FILL is a trademark of Deere & Company.

AG,OUO1011,860 -19-22JUL99-6/6