Folding Boom

causym CAUTION: Avoid injury or death to others. Make sure no one is standing near boom when folding to transport boom.

NOTE: If roll bias option is installed, make sure boom is completely horizontal before folding.

1. Press top of raise/lower switch (A) and raise boom to highest position.


A-Raise/Lower Switch

N42173OK

AG,OUO1011,895 -19-27JUL99-1/3

2. Press and hold fold mode switch (A) down while pressing top of fold/level switches (B) until boom is folded.

3. Release fold/level switches and fold mode switch.


A-Fold Mode Switch
B-Fold/Level Switches

N42173OX
N42184AB

AG,OUO1011,895 -19-27JUL99-2/3

4. Press bottom of raise/lower switch (A) and lower boom into boom rests.

IMPORTANT: Do not level cylinders when boom is folded in unless transporting machine on semi trailer and transport width needs to be under 3.7 m (12 ft) or machine damage will occur.

IMPORTANT: Machine may be damaged if transported with booms not completely lowered onto boom rests. Booms must be folded and lowered onto boom rests before transporting.

NOTE: Leveling cylinders need to be retracted only when transport width needs to be under 3.7 m (12 ft).

5. Press top of fold/level switches until leveling of cylinder is completed.

N42173OM


A-Raise/Lower Switch

AG,OUO1011,895 -19-27JUL99-3/3