Change Front Planetary Hub Oil-500 Hours

1. Park machine on flat level surface.

2. Rotate hub until plug (A) is positioned at bottom.

3. Remove plug and drain oil from hub.

IMPORTANT: Plug must be positioned JUST above horizontal line (B). The plug must be at this position for the hub to be filled to the correct oil level.

NOTE: Plug is magnetic. Clean metal filings off plug.

4. Fill hub until oil is level with bottom of plug hole. (See PLANETARY HUB OIL in this section for recommended oil and Specifications section for refill capacity).

5. Install plug.


A-Plug
B-Horizontal Line

N42184DC
N42184DQ

NX,HYD,S4 -19-04JAN99-1/1