Foam Marker
N74748


A-Setup Softkey
B-Spray Setup Tab
C-Drop-Down Box
D-Foam Marker Switch

1. Select the Setup softkey (A) to view the setup menu.

2. Select the Spray Setup tab (B).

3. Select drop-down box (C) next to "Foam Marker" and select between:

  • "OFF"
  • "AUTO - LOW"
  • "AUTO - HIGH"
  • "MANUAL - LOW"
  • "MANUAL - HIGH"
N74749

OUO6092,0000D72 -19-11JAN07-1/2

When "MANUAL - LOW" or "MANUAL - HIGH" is selected, the operator controls which side of the vehicle the marker is operating. When "AUTO - LOW" or "AUTO - HIGH" is selected, the foam marker automatically switches from one side to the other when the solution spray master ON/OFF switch is turned off and then on again, or if switch on top of multifunction control handle is pushed.

Foam marker switch (D) on multifunction control handle is a two-function switch used to select right-hand or left-hand foam markers. Foam marker system is turned off by pressing both "L" and "R" switches at same time.

OUO6092,0000D72 -19-11JAN07-2/2