Setting Clock
1.
Switch ignition to ON position.
2.
Press and hold DSPL/TM SET (A) button until the "hours" digits flash (while this is flashing, take your finger off the button).
3.
Press SEEK (B) or TUNE (C) to set the correct hour.
4.
Press and hold DSPL/TM SET until the "minutes" digits flash (while this is flashing, take your finger off the button).
5.
Press SEEK or TUNE to set correct minute. The seconds are reset to zero when minute setting is changed.
|
A-DSPL/TM SET
B-SEEK
C-TUNE
|
