NOTE: To rinse pump, boom, and flowmeter only, perform the following procedure.

During a boom rinse cycle the pump bleed and air bleed lines will add some fresh water to the solution tank. This could result in the product being diluted and/or extra product in the tank.

1. Turn suction valve (A) to "RINSE TANK" position.

2. Turn pressure valve (B) to "SPRAY" position.

3. Turn bypass valve (C) to "NORMAL" position.

4. Turn on spray system and spray rinse water through boom assembly.

OUO6092,0000EFF -19-13NOV08-1/1