Transporting Machine—Integral

N39084
N39084-UN-30MAR89

N57208
N57208-UN-06JUN01

A - Lift Link Dimension

B - Center Link Dimension

  1. CAUTION: To prevent serious injury or death to you or others:

    • Do not use tractor equipped with rear tires smaller than 18.4 x 38 because of insufficient transport clearance, which can cause points to contact ground.
    • Do not exceed maximum machine transport speed of 16 km/h (10 mph). Faster speed may result in tractor control loss if an outer standard contacts ground due to uneven ground contour.
    • Do not travel at any speed which does not permit adequate steering and stopping control.
    • Do not transport improperly lit machine, which can cause accident. When transporting machine on a road or highway at night or during day, use lights and devices for adequate warning to operators of other vehicles. Check local governmental regulations. Various safety lights and devices are available from your John Deere dealer. Keep safety items in good condition. Replace missing or damaged items.

    NOTE: If lift link and center link dimensions are shortened for transport, dimensions must be readjusted for field operating depth.

    Shorten lift link dimensions (A) and center link dimension (B) to minimum length for maximum transport height.

  2. NOTE: 3 and 4-Standard machines have one parking stand. 5, 7, and 9-Standard machines have two.

    N56788
    N56788-UN-15MAY01

    A - Parking Stand

    Raise parking stand (A). Retain parking stand with retaining pin and spring clip.


  3. Warning lights, SMV emblem, and reflectors must be clean and visible at all times.

AG,OUO6056,384-19-20030424