-
Use recommended tractor size. (See Specifications section.)
-
Be sure tractor has proper ballast.
-
Be sure tractor tires are properly inflated for heavy draft
pulling.
-
Work at a recommended speed of 6.5 km/h (4 mph) for best tillage
results. Do not exceed 9.7 km/h (6 mph). In rocky conditions, reduce
speed.
-
Standards are designed for maximum depth of 406 mm (16 in.).
-
Raise machine out of ground when making sharp turns.
-
Do not back up with standards in ground.
-
Follow instructions for leveling machine side-to-side and front-to-rear
in this section.
-
Be sure machine tires are properly inflated.
-
Follow instructions for adjusting machine components in this
section.
-
Depth Control Cylinders—Set
SCV I lever for proper depth control.
-
Wing-fold Cylinders—Place lever
in NEUTRAL position.
-
Be sure machine is on level ground before raising or lowering
wings.
-
Do not raise or lower wings while machine is in motion.
-
Do not operate machine in field with wings raised.