Checking Tire Pressure

CAUTION: Failure of overloaded and improperly inflated tires on drawn machine can cause loss of steering control during transport, resulting in serious injury or death to you or others. ONLY use proper tire sizes that are listed and that conform to specification. Always inflate tires to specification. Check tire pressure every 50 hours of operation.

IMPORTANT: To ensure proper machine performance, ONLY use proper tire sizes that are listed and that conform to specification. Always inflate tires to specification. Check tire pressure every 50 hours of operation.

Equal pressure in all tires is necessary for even penetration. A low tire causes deeper penetration on one side than other, resulting in machine side draft. Inflate tires to specification.

Wheel Type	Tire Size	Pressure kPa (bar) (psi)
Stabilizer Wheel	20.5 x 8.0	241 (2.4) (35)
Depth Control Wheel—7-Standard Machine with Drawn Hitch	11L x 15FI (Load Range D)	414 (4.1) (60)
Depth Control Wheel—9-Standard Machine with Drawn Hitch	12.5L x 15FI (Load Range D)	414 (4.1) (60)