Machine Specifications

6–Row Configuration—Available Spacings
762 mm (30 in.)
813 mm (32 in.)
914 mm (36 in.)
965 mm (38 in.)
1016 mm (40 in.)

Row Units
Number of Units	6
Number of Drums	2 per unit
Number of Bars (Front Drum PRO-16)	16
Number of Bars (Rear Drum PRO-16) (Front and Rear PRO-12 VRS)	12
Number of Spindles
Per Bar (PRO-16)	20
Per Bar (PRO-12 VRS)	18
Per Unit (PRO-16)	560
Per Unit (PRO-12 VRS)	432
Per Machine (PRO-16)	3360 (6-Row)
Per Machine (PRO-12 VRS)	2592 (6-Row)
Standard Equipment	Stalklifter extensions and tunnel grates Automatic header height control system

Row Unit Speeds (PRO-12 VRS)1
Row Unit Drive Shaft	1480 rpm
Picking Drum	0—163 rpm
Doffer Shaft	0—1841 rpm
Spindle	0—4322 rpm

Row Unit Speeds (PRO-16)
Row Unit Drive Shaft	1550 rpm
Picking Drum	0—149 rpm Front, 0—171 rpm Rear
Doffer Shaft	0—1875 rpm Front, 0—1928 rpm Rear
Spindle	0–4450 rpm Front, 0—4527 rpm Rear

Air System Fans
Speed (Engine at 2200 rpm)	4330 rpm (Nominal)

Capacities
Module Weight	2041—2268 kg (4500—5000 lb.)
Fuel Tank	1400 L (370 gal.)
Moistener Solution Tank	1363 L (360 gal.)
Lubrication Reservoir	257 L (68 gal.)
Cooling System	56 L (15 gal.)
Engine Crankcase (Includes Filter)	41 L (11 gal.)
Hydraulic Oil Reservoir	189 L (50 gal.)
Hydraulic and Hydrostatic System	276 L (73 gal.)
ProDrive Transmission and Brake System	19 L (5 gal.)
Final Drive	7.8 L (2 gal.)
Pump Drive Gearbox	15.1 L (4 gal.)
Row Unit Gear Case (Each, 6 used)	0.66 L (0.175 gal.)
Hydraulic Unit Drive Reduction Gearbox (Each, 2 used)	0.595 L (0.157 gal.)
Powered Rear Axle Main Body Housing	7.8 L (2 gal.)
Powered Rear Axle Auxiliary Gearbox	1.3 L (45 oz.)
Powered Rear Axle Planetary	3.8 L (1 gal.)

Tires
Front Dual Wheels	Standard: 520/85R42 (R1) Optional: 520/85R42 (R2)
Rear Guide Wheels	Standard: 520/85R34 (R1) Optional: IF580/80R34 (R1W)

Brakes
Type	Wet, Multiple disk
Parking	Spring applied, Hydraulically released (Automatically applied when multifunction control handle is in neutral position or engine off)

Hydraulic System
Ground Drive (Charge Circuit Filtration)	Closed Loop Variable Displacement Differential Pressure—42,700 kPa (427 bar) (6192 psi)
Unit Drive System (Charge Circuit Filtration)	Closed Loop Variable Displacement Differential Pressure—30,200 kPa (427 bar) (4379 psi)
Round Module Builder Drive System (Charge Circuit Filtration)	Closed Loop Variable Displacement Differential Pressure—25,500 kPa (255 bar) (3698 psi)
Steering System	Open Loop Fixed Displacement Pressure—20,700 kPa (207 bar) (3002 psi)
Auxiliary System (Return Filtration)	Open Loop Variable Displacement -PL Control PL Setting Pressure—21,000 kPa (210 bar) (3045 psi)
Oil Cooler	Oil-to-Air Cooler For Case Drains
Oil Filter	Suction Strainers, Return Filters

Final Drive
Type	Ring and pinion
Ratio	9.5:1 (10 to 95)

Electrical System
System Type	12 Volt, Negative Ground
Battery (3 used)	GRP31, 925 CCA
Alternator	200 amp
Cab Headlights	Type 9005 (RE179326)
Cab Field Lights (Optional HID)	(RE179974)
Cab and Light Bar Field Lights, Rear Work Lights (Sealed Beam)	AN272464
Front and Rear Amber Warning Lights	Type 1156 (AD2062R)
Rear Turn Signal and Hazard Lights	57M7014
Rear Tail and Stop Lights	57M7011
Turn Signal Indicator and Corner Post Gauges	Type 161 (AA27526 OR R77436)
Dome and Console Light Bulb	Type 211-2 (57M7173)
Fuses	See FUSE IDENTIFICATION in Electrical System Service section

Engine
Model	John Deere 6135HN004 PowerTech™
Type	Wet sleeve, valve-in-head, air-to-air aftercooled, diesel
Aspiration	Turbocharged
No. of Cylinders	6, in-line
Compression Ratio	16.0 : 1
Bore	132 mm (5.20 in.)
Stroke	165 mm (6.50 in.)
Displacement	13.5 L (824 cu. in.)
Horsepower (2100 rpm)	Nominal: 395 kW (530 hp.) Boost: 418 kW (560 hp.)
High Idle Speed Setting	2200 rpm
Medium Idle Speed Setting	1750 rpm
Slow Idle Speed Setting	900 rpm
Lubrication	Full Flow Filter with Bypass

Fuel System
Type	Direct Injection
Injection Pump Type	In-line with Electronic Governor Electronic Unit Injection (EUI)
Fuel Filters
Primary	RE532952
Secondary	RE533910

Engine Air System
Air Cleaner	Dry Type with Safety Element and Aspirated Precleaner
Primary	AH222225
Safety	AH212295

Cooling System
Type	Single Pressure with Gear Driven Water Pump
Temperature Control	Dual, Heavy-Duty, 82 °C (180 °F) Thermostats

Operator's Cab
Features	Cab without ROPS Deluxe operator’s seat with seat belt and operator presence system Instructional seat with seat belt Heater and air conditioner with ClimaTrak control system AM/FM /CD player with weatherband Windshield wiper Module builder LCD monitor Vehicle LCD monitor (gauges, speedometer, and tachometer) Armrest display unit Armrest control console and multifunction control handle
Cab Air Filters
Primary	AH115836
Secondary	AH115833
Windshield Wiper
Blade Length	1150 mm (45 in.)
Arm Length	1150 mm (45 in.)

Mirror, Rear View
Outside (3)	200 x 297 mm (7.88 x 11.68 in.)

Heater
Capacity	5274 W/hr (18,000 Btu)

Air Conditioner
Make (Compressor)	Nippondenso
Capacity	64.46 kW/h (22,000 Btu)
Refrigerant	R-134a
Refrigerant Charge	Approximately 2.3 kg (5 lb.)
Machine Weight
6-Row Units; 1016 mm (40 in.) Spacing; Field Ready, Full Fluids, with Dual Wheels and 5 Rolls of Wrap Installed	32 000 kg (70,560 lb.) Weight Distribution Harvest Mode: 67% Front / 33% Rear Weight Distribution Transport Mode: 58% Front / 42% Rear

Ground Speeds—(See DRIVING MACHINE in Operating the Machine section).
Optional Equipment
Video Camera Observation System
Mud Scrapers for Drive Tires
Lubrication Transfer Pump
Light Bar