Fill Solution Tank with Nurse Pump and Front Quik-Fill—If Equipped

1. CAUTION: Read carefully the directions printed on the chemical manufacturer's labels before handling chemicals exposure to hazardous materials could poison and injure you.

   IMPORTANT: Do not add chemical to tank until just before field use. Follow the chemical manufacturer's instructions for mixing the spray solution to obtain the desired application rate and effect.

   CAUTION: Quik-Fill valve (A) can contain hazardous materials which can poison causing serious injury or death to you or others. Before removing Quik-Fill cap (B), verify Quik-Fill valve is closed.

   
   N102217-UN-16MAY13

   A - Quik-Fill Valve

   B - Cap

   C - Switch

   Verify Quik-Fill valve (A) is closed.

---




2. Open lock levers and remove cap (B).

3. Connect nurse tank fill hose to Quik-Fill adapter, close lock levers, and open nurse tank valve.

4. Move switch (C) to ON position.

5. Fill to desired level using nurse pump.

   NOTE: Automatic fill is not active when filling with nurse pump.

6. Shut down nurse pump and close nurse tank valve.

7. Close Quik-Fill valve and move switch to OFF position.